# THE MECHANICS OF EDGE CHANGE

Comments made by followers of my blog suggest that significant confusion exists 0n the meaning of terms and representations of mechanics, biomechanics and physics used in typical explanations of ski technique and ski mechanics. In particular, there appears to be confusion between pressure and the representation of point forces.

Pressure is a physical force applied to an object that is distributed over the surface of the object.

Center of Pressure or COP is the point center of ground reaction force opposing a corresponding center of applied force acting on a object supported on the ground or a stable surface that acts in the capacity of ground in terms of providing a source of reaction force.

Torque or Moment of Force results from an offset between the centers of opposing physical forces acting on either side of an object.  This offset results in a torque or moment arm that tends ti create rotation about a center. When one force has a greater magnitude than the other force, rotation of the object will occur around the point of rotation.

#### Why typical balance explanations of skier balance are wrong

Balance in skiing is often depicted as a simple alignment of opposing point forces, usually a resultant force R acting in opposition to a snow reaction force S. The mechanics that make the edges of a ski grip are often shown as a simple alignment of opposing forces acting a single point on the edge. Explanations of this nature are physically impossible. What the authorities in skiing seem to conveniently be ignoring is the fact that pressure is applied by the snow along the entire running surface of the edge in contact with the the snow while an opposing area of pressure applied by the weight of the skier is acting on the body of the ski with an offset between the two centers of pressure. The authorities in skiing also seem to conveniently ignore what is arguably the key even in establishing a platform under the outside ski for the skier to stand and balance on, edge change.

Mikaela Shiffrin’s Get Over It drill on the Burke Mountain YouTube site makes a good segue to an explanation of the Mechanics of Edge change in the my next post – https://youtu.be/Bh7KF49GzOc

Bridget Currier is the model every skier should aspire to. She perfectly executes what I call the skimove. The skimove engages the external forces at ski-flat/edge-change to drive multi-plane torques acting about her outside ski into the turn while setting up a solid platform under her outside foot for her to stand on. Magnificent! This video should have at least a million views.

My comment from 2 years ago

Note carefully Currier’s stance in balance on her new outside ski, in particular, the angle of her torso with the snow. This is key to loading the ball of her outside foot.

Note carefully Shiffrin’s comment to move forward onto her new ski and how she used to think the movement was a lateral (sideways) move.

Most important of all – Patient Initiation. The reason? Shiffrin and Currier, don’t tip their outside ski on edge. They rock it on edge with a rocker impulse loading mechanism. The sequence is Rock, Roll n’ Rotate then Rotate the outside leg.