The universal boot truisms that David puts forth in his blog is a ‘blueprint’, ‘computer program’, what ever you want to call it which is applied on an INDIVIDUAL basis. Each individual is measured with the system and then the results are applied to the boot. Unlike ‘one boot fits all skiers’ which is the current system the industry provides. I can’t believe that anyone would buy a boot based on a ski magazine test but that probably is hardly worse than the info one gets in the ski shop which gave me nerve damage in my feet (gratefully healed now since I gave up on ‘race fit’). David talks about using flat shims of varying thicknesses to fine tune ramp angle just like canting shims or duct tape are used for lateral experimentation; 2.5-6 is his starting point while I would start with zero but with current ski bindings only millimeters of fine tuning can be done when some individuals need centimeters from the current setups. Obviously if one changes the ramp angle the shank angle may have to be adjusted also which is why skiing is believing, David gives a perfect example in his reply on what lower ramp angle did for his skiing. Also the extremely high starting point on ramp angle makes it impossible for many skiers to loosen their cuff for normal forward flex because they need to be clamped tight to prevent falling one their noses; that’s where I got fooled for a couple of decades.

Having built an adjustable plate for ramp/delta in the early 2000s I can tell you one thing for sure; the skier knows instantly if things are better or worse. That by no means indicates an optimum net ramp because there are so many other aspects of the boot that are factors such as toe crunch (race fit) and ankle flex restricted to virtually zero. I started from the wrong end with ramp/delta whereas David starts in the boot first which is what I would do but took me about a decade to loosen my boot cuff significantly enough to make a difference; that due to a hip joint that was killing me from skiing. 2 months after loosening the boot cuff and removing the power strap which is only good for carrying the boots (my opinion), I was introduced to The Skier’s Manifesto and learned from that how to create an ankle glide path, free the toes, free the arches, etc. What amazes me is 2 things; first that when I first decided to build the BalancEnhancer as I call it (due to a friend’s prodding), that it actually worked , and second, how hard it is to even get skiers to try something different and the number that do try it and then don’t even try to modify their own equipment to their needs based on what had made there skiing better!!

  • Michael Pupko